Products

Fasatan® / Fasatyl® Optima es

Fasatan® / Fasatyl® Optima es

Fasatan® Optima es for outside use and Fasatyl® Optima es for inside use – the EPDM sealing films with plaster-ready non-woven coating

Characteristics

Fasatan® Optima es for outside use and Fasatyl® Optima es for inside use are EPDM-sealing films with plaster-ready non-woven coating – at your choice and depending on the application, with or without self-adhesive coatings and self-adhesive strips made from various adhesives such as acrylates and/or butyl rubber.

Fasatan® and Fasatyl® are sealing films made from EPDM rubber for façades. Thanks to the special non-woven coating on the film surface, Fasatan® Optima es for outside use and Fasatyl® Optima es for inside use can be plastered, painted and bonded over with hydraulically setting adhesive systems.

They come either with BOSIG High-Tack adhesive that can be processed at low temperatures or with our butyl rubber adhesive layers, which are self-adhesive over the entire surface or in special strip variants. These self-adhesive strips ensure particularly time-saving and easy processing.

No further adhesive is required and flash-off times are a thing of the past. The special adhesive strips offer very good adhesion on a wide variety of substrates.

Customer benefits

Fasatan® and Fasatyl® Optima es offer you the following benefits:

  • Accommodates any normal structural expansion 
  • Completely solvent-free 
  • Durable sealing characteristics over time 
  • Significant cost savings thanks to time saved 
  • Water-tight in accordance with EN 1928 
  • Plaster-ready

Fasatan® Optima es and Fasatyl® Optima es are available in a variety of versions with different self-adhesive coating widths. Please get in touch, and we will design a solution for you.

Field of application

Fasatan®/Fasatyl® are sealing films made from EPDM rubber for windows and façades, for curtained, rear-ventilated façades and for post and beam structures as well as any penetrations into the building envelope.

In combination with our system adhesive Fasatan® TFS, Fasatan® ES (plaster-ready version with no self-adhesive) is also suitable for sealing in areas in ground contact as per DIN 18533 in accordance with the specifications for water impact classes W1.1-E, W1.2-E, W2.1-E and W4-E.

Please note the film thickness specifications here: 

  • Fasatan® strong ES can be used without any further approval. 
  • Fasatan® ES is approved in conjunction with our DIBt general design certification Z-72.4-29 in its versions with 0.8 mm and 1.0 mm sealing layers.

Product Information

Fasatan® and Fasatyl® Optima es are available in a variety of versions with different self-adhesive coating widths. Please get in touch, and we will design a solution for you.

Property Data Notes
Available strengths 0.6 / 0.8 / 1.0 / 1.2 mm
Length of roll 20 m
Versions The product is available in a variety of versions with different self-adhesive coating widths. Our expert advisers are happy to advise you on all of our options.

Downloads

Technical Information Fasatan® / Fasatyl® Optima es [PDF - 128 kB]

Declaration of Performance Fasatan eco Optima - EPDM waterproofing membrane (0.6 mm thick) [PDF - 59 kB]

Declaration of Performance Fasatan 0,8 Optima - EPDM waterproofing membrane (0.8 mm thick) [PDF - 61 kB]

Declaration of Performance Fasatan 1,0 Optima - EPDM waterproofing membrane (1.0 mm thick) [PDF - 61 kB]

Declaration of Performance Fasatan strong Optima - EPDM waterproofing membrane (1.2 mm thick) [PDF - 60 kB]

Declaration of Performance Fasatyl eco Optima - EPDM waterproofing membrane (0.6 mm thick) [PDF - 59 kB]

Declaration of Performance Fasatyl 0,8 Optima - EPDM waterproofing membrane (0.8 mm thick) [PDF - 59 kB]

Declaration of Performance Fasatyl 1,0 Optima - EPDM waterproofing membrane (1.0 mm thick) [PDF - 59 kB]

Declaration of Performance Fasatyl strong Optima - EPDM waterproofing membrane (1.2 mm thick) [PDF - 60 kB]

Brochure - Fasatan / Fasatyl [PDF - 559 kB]

additional products

Advice

Go to top